The thermal electric generator has several advantages over all other generators. Thermoelectric generators can help to tap into unclaimed resources that are now considered to be waste. The energy from heat can be found from many different places where as other sources are not be found. The modules are very solid-state, which makes this ideal for any task from the harsh environment like incinerators, automobiles and even space craft.
The thermal electric generator have some applications with anything that can supply a source of heat. Like a stove, an automobile, a furnace or even a propane burner to name just a few. You shall find so many results online where you can find plenty of information in regard to the thermoelectric modules.
For you to ever use a thermal electric generator you shall need to have a cold source and also a heat source as well. An ideal source of heat should be about 250c and you will need a cold source of about 0c. For you to get the better performance this generator shall need to be mounted using some heat sink compound along with a strong mechanical force, like a bolt or even a spring.
The ideal pressure for this type of process would be about 200 psi as is will produce the more better results. It is known that the spring pressure works the best because it can account for any thermal expansion. Also the mounting will apply to the cold surface and also the heat surface of a module.
Should you ever use more than one module you can connect them both to modules electrically in a series. The electrical power that is needed will be the same if they were connected right into parallel. You could also wire up the generator right in to a rechargeable battery. By doing this you will have a battery that allows you to have some back up for the generators during any low production.